Fire Alarm Control Panel with 220V AC/50Hz Power and 500mA Maximum Output Current

Model Number: AH-00212 Key Specifications/Special Features: Characteristics:This unit has accumulation function, it can minimize the falsealarm that caused by unstable pulse or any abnormal signal (falsealarm ) and no effect on the function of fire alarm at allEach zone uses two different LED to indicate fire alarm anddisconnectionZone test switch uses single-loop press type to improve thetwisting switch that its contact failure will be caused by dust andimproper useLogical switch is different from traditional switch that needsto switch over higher voltage directly, it can prevent the damagecaused by unstable voltageExternal indicator power-save device can select Light ON or OFFunder normal condition during power-off status and stay blinkingduring alarm status which extend the operation like of controlpanel (prevent the control panel loss its function by wear-off onbattery under power-off period)Easy to switch from fire alarm to smoke evacuation, sprinklingor foam system

Movable zone indication labels, they can be easily changedwithout affect its magnificent appearance

Annunciator is available on model AH-02124.

• Specification:

• Power: 220V AC/50Hz (others also available)
• Battery capacity: 24V DC, 0.8Ah at 1 zone/1.2A at 1 to 10zone
• Charging voltage, current: 26V DC 100 to 400mA (with autoadjustment function)
• Exterior resistance: round-trip under 50
• Number of heat detector connected: no limit (exceptelectronic-type)
• Number of smoke detector connected: 30/zone
• Maximum output current: 500mA at 1 zone/1A at 1 to 10 zone
• Digital switch: 500,000 cycles minimum reliability
• End of line resistor: 10k (one per zone)
• Material: 1.2mm steel plate
• Color: ivory white (others also available)
• Dimensions: 280 x 160 x 70mm (1 zone)/350 x 285 x 105mm (1 to10 zone)